Κατηγορίες Blog
Σχετικά Άρθρα
Optoma UHZ65UST
Optoma UHZ65UST
07/11/20190

Optoma 3 Χρόνια Εγγύηση
Optoma 3 Χρόνια Εγγύηση
04/07/20190

Atoll Mini Line
Atoll Mini Line
21/03/20190

BenQ New Models Entry Level
BenQ New Models Entry Level
28/09/20180

Νέα SAMSUNG 8Κ Q900R
Νέα SAMSUNG 8Κ Q900R
13/09/20180

Octave HP 700

Octave HP 700
Κατασκευαστής:Octave
Κωδικός Προϊόντος:HP 700 Option Stepped Attenuator
Διαθεσιμότητα:Σε απόθεμα
2.650,00€
Για την έκπτωση σας, απλά καλέστε μας στο 210-9953001
Ποσότητα:Καλάθι
Octave HP 700 Option Stepped Attenuator for Volume, 47 steps frequency compensated

(Necessary in combination with a Phono Input Module) 

Option Stepped Attenuator for Volume, 47 steps frequency compensated

 

HP700 | The Next Step

HP700 - sophisticated valve technology combined with intelligent modularity make this pre-amp future-proof. A valve pre-amp boasting innovative precision technology and a modular concept that allows the listener the freedom to build a system to cater for individual music tastes. Instead of being bound by the fixed audio and technical parameters of the equipment, listeners can adapt the technology of the HP700 to their own requirements and preferences. The result is THE sound - the optimal sound experience for the individual high-end audio system and the individual listener. THE NEXT STEP - A major step toward the ideal of all music lovers.


PRECISION TECHNOLOGY IN THE LINE STAGE

Three amplification settings, combined with selectable output impedance, enable perfect fine-tuning of the HP 700 to the characteristics of the sound reproduction chain. The three-stage amplification settings allow optimal matching of the volume control to the efficiency of the speaker. The ability to select the output impedance – and therefore the output current – facilitates optimal set-up of the unit for the cable properties, cable length and cable capacity as well as for the input sensitivity of the output stage.


PSU TECHNOLOGY

In combination with the newly developed high-precision, low-noise supply-voltage stabilizing circuitry, the separate power supply unit for the HP 700 ensures constancy of the audio output even when the mains voltage is subject to wide fluctuations and high interference levels. Added to this, the integrated control logic system guarantees maximum operational reliability and, backed by our exclusive soft-start technologies, ensures the valves and the unit have a life of up to twenty years.

BYPASS

The multi-channel bypass function allows the HP700 to be integrated into an existing home-theater combination. The logic-controlled input selector circuitry allows selection of the bypass function for an XLR or phono input on the rear panel. The HT signal is present at all three outputs.

EXTERNAL POWER SUPPLY UNIT

The sophisticated design of the HP 700 makes extremely high demands on the power supply unit. The external power supply unit is magnetically screened and supplies a clean voltage to the HP 700. The screening is also essential to ensure low- noise, low-hum operation of the phono MC input.

ADDITIONAL INDIVIDUALIZATION OPTIONS:

MODULAR INPUTS

The connection possibilities of the generously configured standard model are rounded off by two user-selectable optional input modules. An optimized input module can be used for unusual applications, for anything from an MC step-up transformer to a transformer-based XLR input module. The plug and play modules can be readily installed or upgraded at any time.

PHONO

Next-step technology has also been applied in the redesign of the Phono RIAA amplifier. The further development of the RIAA stage has improved the signal/noise ratio, while simultaneously reducing system-related distortion. The widening of the bandwidth enables accurate RIAA equalization and exploits the full potential of analog reproduction. The wide variety of optional input modules ensures that the optimal input can be installed for every pickup.


TONE CONTROL PRECISON TONE CONTROL

The innovative optional tone control rounds off the HP 700 equipment. The precision valve-based tone control unit guarantees consistency of the sound, even at low volume. Precision adjustment of bass and treble, with a 0.3dB channel separation, allows the tone to be adjusted without impairing the spatial reproduction.


BALANCE CONTROL

The frequency-compensated balance control allows channel-separated volume adjustment in 1 dB steps. This technology eliminates any controller-related sound shifts. Using 12-position stepped switches, the setting is longtime stable, with 100% repeatability.


OUTPUT SELECTOR SWITCH

The unit output can be switched to several zones by manual activation of the outputs. Whether the output is through XLR, phono or all three outputs simultaneously, a total of three output stages can be utilized for separate rooms, different speakers or bi and tri-amping.


STEPPED VOLUME CONTROL

The optional, frequency-compensated 47-position stepped switch ends the debate about the influence of the controller on the quality of the music signal. At 0.1dB, the channel deviation is supreme. Our own in-house development, the volume control design maintains the frequency bandwidth constant throughout the entire control range, reducing controller-related distortion to a scarcely measurable level.
However, as a result of the mechanical design of the stepped attenuator, the switch positions cannot be controlled using the remote control.

 
Basic Model HP 700
Design 
Aluminium silver or Aluminium black
 
 Specifications   
invi
 In- and outputs   
invi
 Inputs 

3 x RCA, 2 x XLR, 2 x arbitrary
1 x Bypass RCA (can be switched to IN4 -XLR)

 
invi
 Outputs 2 x RCA, 1 x XLR, 1 x Monitor / Tape Record (RCA) 
invi
 XLR transmission ratio 0 dB 
invi
 XLR pin assignment 1 = ground, 2 = positive, 3 = negative 
invi
 Line stage   
invi
 Output resistance 100 / 300 ohms RCA; 150 ohm XLR 
invi
 Monitor Out output resistance 240 ohms 
invi
 Maximum output voltage 12V 
invi
 Gain factor Gain High 25 dB = 18,5 
invi
 Gain factor Gain Med 18 dB = 7,8 
invi
 Gain factor Gain Low 12 dB = 4 
invi
 Signal-to-noise ratio Gain High - 98 dB / 38 µV at 3 V output voltage 
invi
 Signal-to-noise ratio Gain Med - 104 dB / 18µV at 3 V output voltage 
invi
 Signal-to-noise ratio Gain Low - 110 dB / 8 µV at 3 V output voltage 
invi
 Equivalent noise-level 14 nV √Hz 
invi
 Frequency response Gain High-RCA 10 Hz – 200 kHz  -0,7 dB, 0,7 Mhz -6 dB 
invi
 Frequency response Gain Med-RCA 10 Hz – 200 kHz  -0,3 dB, 1.3 MHz -6 dB 
invi
 Frequency response Gain Low-RCA 10 Hz – 200 kHz  -0,2 dB, 2,1 MHz -6 dB 
invi
 Frequency response XLR 10 Hz – 200 kHz  -1,5 dB 
invi
 Ramp-up time Gain Low 250 ns 
invi
 Ramp-up time Gain Low 60 V/µs 
invi
 Total harmonic distortion, Gain Low, Med, High 0.01% at 3V on 10 kOhm 
invi
 Channel separation -90 dB / 1 kHz, Input short-circuited 
invi
 Crosstalk between inputs - 80 dB / RCA, -95 dB XLR / 1kHz 
invi
 Input resistance 50 kOhm 
invi
 Channel matching via volume control 0,5 dB - 70 dB 
invi
 Phono   
invi
 RIAA equalization tolerance 0,3 dB / 15 Hz - 20 kHz 
invi
 Corner frequency - subsonic filter 15 Hz / - 3 dB 
invi
 Signal-to-noise ratio - 75 / - 84 dB / with IN 2 MC Input 
invi
 Input sensitivity 250 µV / 600 µV / with IN 2 MC Input 
invi
   Input sensitivity, gain and input resistance depend on input module 
invi
 Gain MC Gain Low - Pre Out Gain Low: 70 dB, Med: 77 dB, High: 83 dB 
invi
  
Τεχνικά Χαρακτηριστικά
ΚατηγορίαVacuum Tube Pre Amp
ΧρώμαBlack
Δεν υπάρχουν αξιολογήσεις για το προϊόν.

Γράψτε μια αξιολόγηση

Το Όνομα σας:


Η Αξιολόγηση σας:Σημείωση: δε μεταφράζεται η HTML!

Βαθμολογία:Κακή           Καλή

Εισάγετε τον κωδικό στο ακόλουθο πλαίσιο:



Ετικέτες:Octave, HP 700, Vacuum Tube, Preamp